How To Fix A Hole In Spandex Material (Step by Step Guide)

People ask, how to fix a hole in a Spandex material? Well, we´ve got you covered.

Fixing a hole in spandex or stretchy material can be tough but not impossible. With the right tools and methods, you can make your spandex fabric look like new again.

So, how to fix a hole in a Spandex material? The best way to fix a hole in spandex is to use a spandex patch and sewing machine. This method is the fastest and results in the cleanest appearance. If you don’t have a sewing machine, you can sew by hand or use an adhesive patch instead, though these options don’t always look the best.

To learn all the steps for these three methods, keep reading. You will learn exactly how to fix a hole in spandex material with tools and skill sets that are right for you.

How To Fix A Hole In Spandex Material

The best way to fix a hole in spandex material is to patch it up with a fabric swatch and sewing machine. All you will need to do is cut out a patch from a similar material and then sew it over the hole. This method will work for all sized holes.

This is the method we recommend for most people.

If you have a small hole and don’t want to use a sewing machine, you can sew up small holes by hand. This method involves using thread to just cover up the hole directly.

It is best for small holes and individuals with some sewing experience.

The third method is great for those with no sewing experience. Use an adhesive patch and fabric to easily patch over the hole.

This method does not require a sewing machine or any skills. We recommend this option for individuals who are not comfortable sewing by machine or hand.

Read also: How to Fix a Hole in Gymshark Leggings (Best Tips Explained!)

Method 1: Patch It Up (Recommended)

The best way to fix a hole in spandex material is with a spandex patch. This method is best done with a sewing machine, but you can do it by hand too.

If you definitely want to patch it up by hand, make sure to check out Method 2 as well so that you can select an option best suited for your sewing skills.  

What You’ll Need

• Spandex patch
• Scissors
• Stretch sewing needle
• Polyester tread
• Tape measure

Step-by-Step Guide

1. Measure the size of the hole.
2. Use the measurements in Step 1 to cut out a patch. Make sure the patch is slightly bigger than the hole.
3. Thread your sewing machine with polyester thread OR thread the polyester thread through the stretch needle.
4. Place a patch over the hole.
5. Sew the patch over the hole using a zigzag stitch.
6. Double-check the patch. Repeat stitches if needed.

Method 2: Hand Sew

If you don’t have a sewing machine, then you can try this hand sewing technique instead. This method is best for smaller holes.

It will certainly be difficult to use this method for large holes.

What You’ll Need

• Stretch sewing needle
• Polyester thread
• Scissors

Step-by-Step Guide

1. Thread the needle. When sewing by hand, you should thread the needle with a lot of excess thread so that you don’t run out of thread.
2. Turn the garment inside out.
3. Begin away from the hole.
4. Stitch the entire hole.
5. When you are finished, stitch a bit further than the hole to ensure you are beyond the hole.
6. Tie the thread in a knot.
7. Cut off the stitch.

Method 3: Adhesive Web Patch

If you have absolutely no sewing experience, then Methods 1 and 2 might not be right for you. Instead, try out this adhesive web patch method. This method only requires some slight darning that is easy enough for absolute beginners who have never sewn anything before.

What You’ll Need

• Stretch sewing needle
• Polyester thread
• Fabric adhesive
• Scissors
• Extra fabric that matches the garment

Step-by-Step Guide

1. Turn the garment inside out.
2. Cut out fabric adhesive so it fits over the hole. Make sure it is slightly larger than the hole.
3. Cut out a patch from a similar fabric. Make sure it is the same size as the fabric adhesive patch from Step 2.
4. Place the fabric patch over the adhesive patch. Let it dry.
5. Darn around the patch edges.
6. Use water to remove any remaining washable adhesive.

Tips To Keep In Mind When Fixing A Hole In Spandex

No matter which method you select, here are three tips to keep in mind to make sure you get the best results.

Select Material Carefully

Always select material carefully so that the patch and thread match the garment as closely as possible.

This includes paying attention to the feel of the fabric, as well as the color. This applies to the thread too. Make sure the thread matches in color. 

If you need to go to different stores, so be it. Selecting materials carefully will result in the best finish.

Use The Right Tools  

Get the right tools to match. For example, you will need stretch sewing needles and polyester thread. If you get other needles and thread, you might break the fabric.

So, don’t waste your time sewing up the hole if you don’t have these tools.

Go Slow

When it comes time to actually sew up the hole, go slowly. You might be tempted to go fast, especially if it is a small hole, but this can cause you to rip the hole and fabric even more. Remember: slow and steady wins the race!

Read also: How to Fix a Hole in Athletic Leggings (Best Tips Explained!)

Final Thoughts

As you can see, there are quite a few ways that you can fix a hole in spandex or stretchy materials. The best way is Method 1, the patch method with a sewing machine.

However, you can sew by hand or use an adhesive patch if you don’t have a sewing machine.

Select a method based on the tools at hand and your experience with sewing. If you think about these two things, you should be able to select the method for your situation.

Regardless of which method you select, be diligent in selecting the best material and tools for the job. Then, go slowly. You got this!

References

https://sewingiscool.com/how-to-fix-a-hole-in-stretch-fabric/